Archive for category New Products
2009-2010 Hyundai Genesis Coupe 2.0T Tsudo Exhaust Sound Clip
Posted by Andy in New Products, Speed-Element Motorsports, Test Fits / Prototypes, Tsudo Performance on July 23rd, 2010
Soundclip is up for the Tsudo 2009-2010 Hyundai Genesis 2.0T 2dr Coupe 76mm / 3″ Downpipe + Quad-Tip SE Catback Exhaust System!
Be sure to check out the exhaust pictures and dyno page for some more info.
Hyundai Genesis Coupe 2.0T Pictures and Dyno TSUDO SE Cat-Back and Downpipe
Posted by Andy in Dyno Tests, New Products, Speed-Element Motorsports, Test Fits / Prototypes, Tsudo Performance on July 19th, 2010
Dyno results are in for Speed-Element’s Hyundai Genesis 2.0T Cat-back and Down-Pipe exhaust system.
This exhaust features 3″ / 76mm outer diameter into dual 2.5″ pipes. 3″ front flange bolts to the stock O2 housing, allowing for a future upgrade to a 3″ O2 housing without cutting or welding. Piping splits into dual 2.5″ pipes with dual canisters to keep the exhaust mellow and smooth while still having straight through performance. Downpipe also features a large resonator to prevent noise and rasp. The exhaust is finished off with quad exhaust tips, which are double walled, stainless steel, and slash angled for a subtle but aggressive look. The whole combination allows for straight through performance while keep the car street friendly without attracting unwanted attention from the police.
Tested on a Dynojet dyno at SR Motorcars. Our test vehicle had an Injen intake and blow off valve. No boost controller, exhaust, or any other modifications. Stock ECU was used on the vehicle with no tuning before or after. ONLY the down-pipe and cat-back were swapped for the dyno comparison.
The exhaust showed solid gains in the mid range all the way up to redline. The torque spiked during the run with the stock exhaust which caused it to show higher numbers than the Tsudo exhaust. Once power stabilized the Tsudo exhaust shows a consistent gain in torque. More power can be easily had with tuning to smooth out the power and take advantage of the increased exhaust flow.
+18.45whp / +14.59wtq @ 6500rpm with just a bolt-on exhaust swap
Test fit pictures below. Check out the SE gallery or the Genesis 2.0T exhaust system page for more pictures
Compare to the competition at triple the price! Shipping now at an unbelievable price! Get yours today.
Tsudo 2009-2010 Hyundai Genesis 2.0T 2dr Coupe 76mm / 3" Downpipe + Quad-Tip SE Catback Exhaust System
2009-2010 Hyundai Genesis Coupe 2.0T Dyno TSUDO Exhaust
Tsudo 2009-2010 Hyundai Genesis 2.0T 2dr Coupe 76mm / 3" Downpipe + Quad-Tip SE Catback Exhaust System
Tsudo 2009-2010 Hyundai Genesis 2.0T 2dr Coupe 76mm / 3" Downpipe + Quad-Tip SE Catback Exhaust System
New Tsudo Chevrolet Cobalt SS Supercharged Cat-Back Exhaust System
Posted by Andy in New Products, Speed-Element Motorsports, Test Fits / Prototypes, Tsudo Performance on July 1st, 2010
Our brand new Chevy Cobalt SS exhaust system has arrived! System uses 2.5″ OD piping specifically for the SS supercharged application. Straight through resonator, N1 muffler, and full mandrel bent piping for maximum exhaust flow. N1 style muffler with a 4.5″ muffler tip for flush fitment with the OEM rear bumper cutout.
Perfect complement with other bolt-on mods. Use this in combination with your intake, header, and downpipe! Installing an oversized 3″ exhaust on an SS supercharged engine will only cause a decrease in low end power on most applications!
In stock and ready to ship, get yours today! Check out the Cobalt SS catback page for more details.
Tsudo 2005-07 Chevrolet Cobalt SS N1 Performance Catback Exhaust System
Tsudo 2002-2003 Mini Cooper S Cat-back Exhaust
Posted by Andy in New Products, Tsudo Performance on April 10th, 2010
We are now stocking the Tsudo dual exhaust for the supercharged 02-03 Mini Cooper S. The system uses 60mm (approximately 2.25″) outer diameter piping, into dual 60mm piping for unrestricted flow after the Y-pipe split. Designed with a large front resonator and dual N1 style mufflers, and finished with dual 80mm (approximately 3.25″) outer diameter exhaust tips. Fully mandrel bent T-304 stainless steel for minimal restriction to exhaust flow to increase horsepower and torque. As with all Tsudo systems, the entire system is polished to a mirror finish for a show-quality look.
Tsudo 2002-03 Mini Cooper S N1 Catback Dual Exhaust System
2008-2010 Lancer FED (Federal) model race/cat-delete header-back exhaust system
Posted by Andy in New Products, Speed-Element Motorsports on March 19th, 2010
Just arrived in our most recent shipment! New Tsudo exhaust design by Speed-Element for 2008-2010 Lancer.
A complete header-back exhaust system for 2008-2010 base model naturally aspirated Lancers. This system bolts directly to the header, and features straight through piping all the way to the muffler. Deleting the catalytic converter allows for maximum horsepower gain, while an oversize resonator / muffler is used in place of the catalytic converter to reduce exhaust rasp while keeping the exhaust tone deep. Muffler features a slanted “JDM drift” style outlet for an aggressive tuner look. ONLY for use on FED emissions vehicles (will not fit on ANY PZEV exhaust system)!
More details and pictures available here: 08 / 09 / 10 Mitsubish Lancer DE / ES / GTS header-back exhaust system
NEW 2008+ WRX turbo sedan cat-back dual exhaust system
Posted by Andy in New Products, Test Fits / Prototypes, Tsudo Performance on March 19th, 2010
All new exhaust for the 08-10 Subaru WRX sedan from Tsudo by Speed-Element! This exhaust features 3″ / 76mm piping into dual 2.5″ / 65mm mufflers. The system has a resonated mid-pipe with flex-joint to reduce stress on the exhaust system and engine. Includes a larger resonator for a smoother and deeper tone which, coupled with dual mufflers, increases performance without being noisy. All Tsudo resonators and mufflers are manufactured with perforated, straight-through cores for more horsepower!
Check out our item page for more pictures and more details!
Tsudo 2008-2010 Subaru Impreza WRX sedan catback exhaust system
2008-2010 Mitsubishi Evolution X Cat-back / Test pipe v2 test fit pictures
Posted by Andy in New Products, Test Fits / Prototypes, Tsudo Performance on February 18th, 2010
Confirmed fitment for 2008-2010 Evolution 10 models.
Manufactured by Tsudo, designed by Speed-Element. (We are always looking for new prototypes, please check our Cars Wanted page for specific makes and models.)
Full 3″ piping into dual 2.5″ mufflers. Version 2 has improved fitment with the bumper cutouts and improved hangar design for more stability with the muffler.
Check out the 08-10 Evo-X SE exhaust system product page for more details
2009-2010 Hyundai Genesis 2.0T (2.0L Turbo) Quad-Tip SE Exhaust System with Test-Pipe from Tsudo
Posted by Andy in New Products, Test Fits / Prototypes, Tsudo Performance on February 12th, 2010
Speed-Element’s Genesis 2.0T turbo exhaust prototype has been completed!
-We are also currently looking for 2009-2010 Hyundai Genesis V6 3.8L for prototyping. Please check our Test Fit / Prototype page for updates.
This system utilizes 3″ / 76mm piping for the test pipe and mid-pipe, into dual 2.5″ / 65mm mufflers with high quality double walled quad tips. The muffler tips line up perfectly with the bumper cutout for a clean, sleek look. Tilted dual muffler setup visible from the rear for an aggressive tuner look. Dual mufflers allow for the use of a test pipe while keeping the exhaust note smooth and deep.
A dyno comparison between stock and the Tsudo SE catback will be available once the product arrives from production.
Currently available for pre-order on our website, reserve yours today!
Hyundai Genesis 2.0T Exhaust System 76mm / 3″ Test Pipe + Quad-Tip SE Catback Tsudo by Speed-Element
New IS250 / IS350 exhaust system from Tsudo by Speed-Element
Posted by Andy in New Products, Test Fits / Prototypes, Tsudo Performance on January 9th, 2010
IS250 / IS350 exhaust catback system
New axle / cat back exhaust section for 2006 through 2009 IS250 and IS350.
Final product features mandrel bent piping manufactured from full stainless steel.
Uses dual SP2 muflers with good muffling while still being a straight through, nonrestrictive design.
Estimated delivery in March 2010, please check the item webpage to for all updates to the arrival date
New / Pre-order special base model 08-09 Lancer Catback PZEV from Tsudo by Speed-Element
Posted by Andy in Inventory Updates, New Products, Tsudo Performance on November 11th, 2009
Tsudo 2008-09 Mitsubishi Lancer DE/ES/GTS SE Performance Catback Exhaust System
2008-2009 Mitsubishi Lancer Base Model DE / ES / GTS SE cat back exhaust system
A brand new design for 08-09 Lancers! Incoming with our 11/30/09 container.
Speed-Element Motorsports has designed a PZEV delete catback, which frees up lost horsepower for CA / NY / NJ. A large straight-through muffler was used to prevent any rasp caused by the removal of the catalytic converter.
CEL fix included for all California, New York, New Jersey, or any other PZEV vehicle state. This prevents the computer from detecting the extra power-robbing catalytic converter has been deleted.
Dual resonator + twin muffler design creates a very aggressive and deep exhaust note with no rasp. Angled-out muffler placement for an aggressive look.
Buy it now at our special pre-order price!
Sound clip with original / OEM header and primary catalytic converter: